DTF PRESSING INSTRUCTIONS

DTF TRANSFER FORMULA

• As a starting point set your heat press to 285°F.
• HEAVY PRESSURE 8-9 PSI. 
• optional - Pre press for 7 seconds to remove wrinkles and moisture;
• Press for 10 seconds and IMMIDIATLY PEEL.

 

Some adjustment may be required with your setup to get this just right for your needs. Try different settings until you are getting consistant results with your equipment.

If your transfers are coming up with the film, lower your temperature and ensure that seams are not causing un-even pressure.

On high-bleed materials or sublimated goods, try reducing the time and temp, keeping the pressure high.